Manuscripts in Preparation:
-
[1]
Lusk, M.T. and M. Fellinger, Grain boundary free energy of hard disk
assemblies using thermodynamic integration from a non-local Einstein crystal,
Journal of Chemical Physics
-
[2]
Schacht, T., M.T. Lusk, E.B. Damm, J. Wei, and E. Holm , Simulation of
aluminum nitride precipitate effects on austenite grain size evolution,
Journal of the Mechanics and Physics of Solids
-
[3] Liu, B., M.T. Lusk and
J.F. Ely, Transition state calculations of the dissociation barriers of
H2 and CH4: A comparison of Ni13 clusters and Ni (111) surfaces,
Journal of Chemical Physics
Refereed Publications:
-
[31]
Lusk, M.T.
and L.D. Carr, Nano-Engineering Defect Structures on Graphene, Physical Review
Letters
(2007, in review)
-
[30]
Zhao, Y., M.T. Lusk, A.C. Dillon, M.J. Heben, and S.B. Zhang, Boron-based
organometallic nanostructures: hydrogen storage
properties and structure stability, Nanoletters 8(1)
157-161 (2007)
-
[29] Lusk, M.T. and N. Hamm,
Toroidal carbon nanotubes with encapsulated atomic metal loops, Physical
Review B 76 125422:1-6 (2007)
-
[28] Lee, S.-J., M.T. Lusk, and
Y.-K. Lee, Conversional model of transformation strain to phase fraction
in low aloy steels, Acta Materialia 55(3) 875-882 (2007)
-
[28] Lusk, M.T., T. Vincent and
M. Upmanyu, Steering of a grain boundary with strain, electromagnetic
field, and stochastic boundary excitation, Journal of Applied Physics 100 103526:1-9 (2006)
-
[27] Lusk, M.T., T. Vincent and M. Upmanyu,
Control of the position of a
material interface via static strain and the amplitude of a stochastic
excitation, Journal of Applied Physics,
99
023505 (2006)
-
[26]
Lusk, M.T. , M. Fellinger, and P.D. Beale, Grain boundary free energy of
hard disk assemblies using thermodynamic integration, Journal of
Chemical Physics, 124 023505(2006)
-
[25]
Chen, N., M.T. Lusk, A.C.T. van Duin and W.A. Goddard, III, Mini Might
Nature 436 1068 ( 2005) (Research
Highlights)
-
[24]
Chen, N., M.T. Lusk, A.C.T. van Duin and W.A. Goddard, III, Mechanical
properties of connected carbon nanorings via molecular dynamics simulation,
Physical Review B 72 085416:1-9 (2005)
-
[23]
M.T. Lusk, M. Upmanyu and T. Vincent, Targeted manipulation of grain
boundaries and triple junctions on thin films using lasers: A Potts model
simulation, Journal of Applied Physics 99(2)
023505:1-7(2006)
-
[22]
Chen, N., M.T. Lusk, R.J. Kee, A. van Duin and W.A. Goddard, III, A
reactive molecular dynamics investigation of hydrogen and oxygen desorption
and diffusion on {111} surfaces of platinum, Journal of Chemical
Physics (Reviewed and in revision)
-
[21]
Modak, A. and M.T. Lusk, Double-layer formation in a kinetic Monte Carlo
simulation of a solid-oxide fuel cell: I Open-Circuit Voltage and Double
layer structure, Solid State Ionics 176 2181-2191 (2005)
-
[20]
Lusk, M.T., Thermodynamic integration at constant pressure from the
non-local Einstein crystal, Journal of Chemical Physics 121
11208-11216 (2004)
-
[19]
Lusk, M.T., Construction of and thermodynamic relations for an Einstein
crystal with nonlocal interactions, Physical Review B 70
174103:1-5 (2004)
-
[18]
Jaramillo, R.A., M. T. Lusk and M. C. Mataya, Dimensional anisotropy
during phase transformations in a chemically banded 5140 steel; part I:
experimental investigation, Acta Materialia, 52(4) 851-858 (2004)
-
[17]
Jaramillo, R.A. and M.T. Lusk, Dimensional anisotropy during phase
transformations in a chemically banded 5140 steel; part II: modeling,
Acta Materialia, 52(4) 859-867 (2004)
-
[16]
Perry, A.C., M.T. Lusk and J.G. Speer, An analytical model and experimental
investigation of the recrystallization behavior of hot-deformed ferrite,
Steel Grips: Journal of Steel and Related Material, 2(3)
203-208 (2004)
-
[15]
Lusk, M.T. and P.D. Beale, Grain boundary free energy in an assembly of
elastic disks, Physical Review E, 69
026117 (2004)
-
[14]
Liu, P. and M.T. Lusk, Parametric links among monte carlo, phase-field,
and sharp-interface models of interfacial motion, Physical Review E
66 061603 (2003)
-
[13]
V.C. Prantil, M.L. Callabresi, G.S. Ramaswamy, J. F. Lathrop, G.S. Ramaswamy,
M.T. Lusk , Simulating distortion and residual stresses in carburized
thin strips, ASME Journal of Engineering Materials and Technology,
125(2) 116-124 (2003)
-
[12]
Lee, Y.-K. and M.T. Lusk, Thermodynamic prediction of the eutectoid
transformation temperatures of low-alloy steels, Metallurgical and
Materials Transactions A 30, 2325-2329 (1999)
-
[11]
Gurtin, M.E. and M. T. Lusk, Sharp-interface and phase-field theories of
recrystallization in the plane, Physica D 130 133-154 (1999)
-
[10]
Lusk, M.T., A phase-field paradigm for recrystallization and grain growth,
Proceedings of the Royal Society of London, A 455 677-700 (1998)
-
[9]
Jou, H. and M.T. Lusk, Comparison of JMAK kinetics with a phase-field
model for microstructural evolution driven by substructure energy,
Physical Review B 55 8114-8121 (1997)
-
[8]
Lusk, M.T. and H. Jou, On the rule of additivity in phase transformation
kinetics, Metallurgical and Material Transactions 28A(2) 287-291
(1997)
-
[7]
Ross, S., M.T. Lusk and W. Lord, Application of a diffusion-to-wave
transformation for inverting eddy current nondestructive evaluation data,
IEEE Transactions on Magnetics 32(2) 535-546 (1996)
-
[6]
Lusk, M.T., A geometrically nonlinear theory of stress-assisted
martensite kinetics, Journal of Elasticity 44 271-284 (1996)
-
[5]
Lusk, M.T., Krauss G. and H. Jou, A balance principle approach for
modeling phase transformation kinetics, Journal de Physique IV, Colloque
8 279-284 (1995)
-
[4]
Lusk, M.T., Martensitic phase nucleation with surface effects,
Journal of the Mechanics and Physics of Solids 42 241-282 (1994)
-
[3]
Lusk, M.T, Martensitic phase transitions with surface effects,
Journal of Elasticity 34 191-227 (1994)
-
[2]
You, Z., M.T. Lusk, R. Ludwig, and W. Lord, Numerical simulation of
ultrasonic wave propagation in anisotropic and attenuative solid materials,
IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 38(5) 436-445 (1991)
-
[1]
Sun, Y., Z. You, L. Udpa, and M.T. Lusk, Determination of
current-equivalent parameters for the fictitious magnetic monopole model of
magnetostatic problems, IEEE Transactions on Magnetics 24(1)
59-62 (1988)
Conference Proceedings:
-
[19] Lusk, M.T., W. Wang, X.
Sun and Y.-K. Lee, On the Role of Kinematics in Constructing Predictive
Models of
Austenite Decomposition, pp. 311--332, in Austenite Formation and
Decomposition, (Eds. E.B. Damm and M.J. Merwin), Minerals, Metals and
Materials Society, Warrendale, PA 2003.
[18] Jaramillo, R. and M.T.
Lusk, Anisotropic, Plastic Deformation during Martensitic Transformation
in Chemically Banded Medium Carbon Steels, 13th International Federation
for Heat Treatment and Surface Engineering Congress (IFHTSE) and the
International Surface Engineering Congress (ISEC), October 2002.
-
[17] M.T. Lusk, R. Jaramillo,
A. Roche, C. Mgbokwere, S. Deshpande, Microstructural Evolution in
Sprayformed Steel: Phase Transitions, Inelasticity Residual Stress and
Distortion, pp. 75--84, in Microstructural Modeling and Prediction
During Thermomechanical Processing, (Eds. R. Srinivasan, S. Semiatin, A.
Beaudoin, S. Fox, Z. Jin), Minerals, Metals and Materials Society,
Warrendale, PA 2001.
-
[16] T.F.
Majka, D.K. Matlock, G. Krauss, and M.T. Lusk, "An Analysis of Tensile
Deformation Behavior and Microstructural Evolution in an Artificially Banded
SAE 5140", Proceedings of the ISS 42nd Mechanical Working and Steel
Processing Conference, Vol. XXXVIII, pp. 75-87, 2000.
-
[15] Lusk, M.T., Y.-K. Lee,
H.-J. Jou, W.E. Elliott and G.M. Ludtka, An Internal State Variable Model
for the Low Temperature Tempering of Low Alloy Steels, Journal of
Shanghai Jiaotong University: Proceedings of the 1st
International Conference on Thermal Process Modeling and Computer
Simulation, March 2000.
-
[14] Lusk, M.T. and Y.-K.
Lee, A Global Material Model for Simulating the Transformation Kinetics
of Low Alloy Steels, Proceedings of the 7th International
Seminar of the International IFHT, 273-282, 1999.
-
[13]
Grach, G., M.T. Lusk, H.-J. Jou, G.M. Ludtka, W.E. Elliott, D. Schick, G.
Dicastanzo, Affect of Austenitization Hold Time and Temperature on Matrix
Carbon Content and Martensite Kinetics in 52100, Proceedings of the 1999
American Society of Metals Conference
-
[12]
Fehringer W.V., J.R. Berger, M.T. Lusk, Interface driving force
calculation with boundary elements, Boundary Element Technology '97,
Knoxville, TN, Apr. 1997.
-
[11]
Bammann, D.J. V.C. Prantil, A.A. Kumar, J.F. Lanthrop, D.A. Mosher, M. Lusk,
H.J. Jou, G. Krauss, W.H. Elliott, A material model for low carbon steels
undergoing phase transformations, Proceedings of the 2nd International
Conference on Quenching and the Control of Distortion (eds. G. Totten, M.
Howes, S. Sjostrom, and K. Funatani) 367-376, 1996.
-
[10]
Lusk, M. and S. Ross, On phase based imaging of eddy current data,
21st Annual Review of Quantitative Nondestructive Evaluation, Quantitative
Nondestructive Evaluation 14A 863-870, 1995.
-
[9]
Ross, S. and M. Lusk, A comparison of millimeter wave and eddy current
detection of surface breaking defects in conducting materials,
Quantitative Nondestructive Evaluation 14A 629-636, 1995.
-
[8]
Lusk, M., K. Radhakrishnan, H. Han and E. Mansueto, Noncontact thickness
measurement of dielectric coatings using millimeter waves, Proceedings
of the International Society for Optical Engineering 2275 79-88,
1994.
-
[7]
Ghorayeb, S. and M. Lusk, Implementation of the "CLEAN" algorithm on
microwave images for nondestructive testing, Proceedings of the
International Society for Optical Engineering 2275 94-102, 1994.
-
[6]
Lusk, M. and H. Han, Nondestructive evaluation using swept-frequency
synthetic aperture radar, Quantitative Nondestructive Evaluation 13A
607-614, 1994.
-
[5]
Han, H. and M. Lusk, Coherent and incoherent components in microwave SAR
images, Quantitative Nondestructive Evaluation 13A 599-607, 1994.
-
[4]
Han, H.C. and M.T. Lusk, Microwave imaging for
features on metallic surface with synthetic aperture radar
Antennas and Propagation Society International Symposium,
3, 1922-1924, 1993.
-
[3]
Lusk, M. and Z. You, The characterization of surface defects using
Rayleigh wave hodographs, Quantitative Nondestructive Evaluation 8B
827-834, 1988.
-
[2]
Lusk, M., Z. You, W. Lord, and R. Ludwig, An evaluation of attenuation in
an axisymmetric finite element code, Quantitative Nondestructive
Evaluation 8B 1731-1737, 1988.
-
[1]
Lord, W.; You, Z.; Lusk, M.; Ludwig, R.,
Numerical predictions of surface wave phenomena for
ultrasonic NDE,
Ultrasonics Symposium Proceedings, 2
1065-1068, 1988.